Our Deluxe Aluminum Pet Door was developed with your Ideal Pet’s safety and sense of adventure in mind. This dog door comes in multiple sizes for your pet’s convenience.
Pet Door Features Include:
- Strong Aluminum frame that adapts to doors ranging from 1/2" to 1-3/4" in thickness
- Clear vinyl flap with patented edges that won’t warp from use or extreme temperatures
- Spring loaded Lockout slide™ to keep your Ideal Pet out of mischief when unsupervised
|Pet Door Style/Size||Pet Door Model #||Thickness Range of Door
||Pet Doors Flap Size||Pet Door Cutout Size||Recommended Weight Range of Pet|
|Small||DDSB||1/2" to 1-3/4"||5" x 7"||5-3/8" x 9-1/4"
||up to 12 Lbs.|
|Medium||DDMB||1/2" to 1-3/4"||7” x 11-1/4"||7-1/2" x 13-3/4"||13 to 35 Lbs.|
|Extra Large||DDXLB||1/2" to 1-3/4"||10-1/2" x 15”||11-1/4" x 17-1/2"||36 to 90 Lbs.|
How to Measure Your Ideal Pet
To determine the correct size door simply measure the width (A) and height (B) of your pet.
(A) Measure the widest point of your pets shoulder
(B) Measure from the top of your pets back (just behind his head) to the bottom of chest.
Posted by Taylor on 27th Feb 2018
Very easy to install. Love how the flap is magnetic to the bottom, so you hardly feel a draft from the opening. My dogs use it all the time and love how they can go outside when they please. The only downfall was how sharp the corners were on the product. Other than that, It is great and it was shipped fairly fast! I definitely recommend!
Best on the market
Posted by Unknown on 21st Feb 2018
We've used this pet door for years in a couple houses, and easy to install and last very long time. The plastic flap needs replaced after several years, but easy to replace.
lining up the screws is torture
Posted by AT on 14th Aug 2017
Seems pretty good quality.
Conceptually the installation should be a snap. Cutting the existing hole I had a little larger to fit this door was a cinch. Then I marked and drilled the holes for the screws. Here's the problem: if you are the teeniest tiniest bit not level or plumb, the holes won't line up. You'll be perfect on one side but need to make swiss cheese out of your door on the other side. Then if your door is a little bit on the thicker side of the allowable range, it is IMPOSSIBLE to get the screw into the receiving piece so that the grab and you can start tightening because getting them lined up when the ends are deep in the door cavity is really really hard. I got 4 of them pretty easily by luck, had some trouble with one (took 10 minutes), and then spent a full hours swearing to get the final screw fitted. This whole issue could be much improved if the kit came with a drill bit GUIDE to help the drill bit go in absolutely perpendicular to the door.
I think if your door is on the thinner side of allowable, you won't have such a problem.
Now I am LOATHING the day when I have to change the flap, because I'll have to take off the frame screws to get to the flap (what kind of silly design is that??).
I have to say I would not buy this again, even though it is on clearance and looks pretty good once it is on (most of the swiss cheese wood is covered and the rest I just caulked).
Posted by Unknown on 31st May 2017
Received this product on time and as advertised. Visual inspection showed a good design with easy to follow instructions and installation. Once installed the pet door fit very nicely on storm door and matched the color of the existing door. Pets used it without any issues, after the install. Only reason I did not give it 5 stars is due to the fact that after installation the provided screws stick out about a half inch or so, wish they would have provided a few different sizes for different door width, other than that would definitely recommend especially for the price
Posted by Unknown on 15th May 2017
I have two of these. great dog door